Categories

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
Leather Doctor

Categories

Categories

EffectWax-8.6

$17.95

EffectWax-8.6

$17.95
Weight:
0.078 KGS
Shipping:
Calculated at checkout
Quantity:
Share

Product Description

Leather Doctor EffectWax-8.6 is formulated for aniline and nubuck fashion wax-pull-up leathers. This is a pH 8.6 waterbased emulsion blend for rejuvenating a diminishing wax pull-up effect lost through usage, aging or cleaning. Wax pull-up leathers are more often found in indoor upholstery and fashion garments with a gloss luster then the more rustic distressed oil pull-up types mainly as waterproofing for outdoors. When leather is pulled or stretch it lightens up and when release returns back to pre-stretch appearance. The liveliness of response depends on the percentage of fatliquor and wax effect content remaining within the leather structure. The routine standalone application is by spraying and working with a horsehair Brush-1 into the leather structure for an even appearance. The pull-up content penetrates into the leather structure while the wax content will crystallize on the leather surface as it dries up from 8 hours or sooner forming a covering of a cloudy wax crystalline. These fine covering of wax is activated with a heat blower or hair dryer transforming them into a coating of natural gloss effect commonly associated with wax pull-up leathers. Optional distress effect is created by kneading and massaging to achieve the desired result. Protector-D (scentless) or Protector-D+ (leather scented) is recommended to impart the leather with non-stick rub-resistant protection against soiling and wear. They are also used as routine care to reduce or eliminate surface scuffing. Size options are available in Fill and Con. Fill is a concentration ratio in the bottle to be cut and fill with distilled water prior to use to save on shipping. The Con is concentrated to be cut/mix and fills with distilled water at a ratio of 1: 9 prior to use.  

A heat blower activates the dried crystalline wax to shine

Tips:
Restorative pull-up effect conditioning should be holistic that included the recommended sequence of the process as follows:

1 – Removing all foreign soiling contamination by degreasing and appropriate matching specialty restorative cleaning system.

2 – Returning the leather structure back to the original dimension correcting overstretching or unnatural creases and wrinkles with Hydrator-3.3.

3 – Returning the leather to original fatliquor suppleness moisture content up to 14% practice by today's modern tannery standard with Fatliquor-5.0.

4 – Replenishing the wax pull-up effect with sufficient penetration or saturation fine wax crystal will form within 8 hours or until it appears and thereby activates the crystalline into a natural gloss luster with a heat blower or hot hairdryer.

5 – Topcoat AnilineTop21G is applied accordingly to achieved or match the desired gloss level.

6 – Protects the leather with a non-stick rub-resistant protector with Protector-B+ or B against soiling and wear.

Instruction for Standalone Application:
1- To warm up and shake well.

2- To spray, spread and saturate sufficiently with horsehair Brush-1 evenly to produce a darkening effect.

3- To allow up to 8hours natural drying time or until crystalline are apparent.

4- To activate the wax deposit with a heat blower or hot hair dryer to a natural gloss luster.

5. To impart a draggy-feel non-stick rub-resistant protection, use Protector-D+ or D after EffectWax-8.6 or AnilineTop-76G.

Product Reviews

Find Similar Products by Category