Categories

Categories

Additional Information

Additional Information

Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
loader-image Loading... Please wait...
Leather Doctor

Categories

Categories

Leather Aniline Smoke Odor Remover - Kit-A3.so

$89.95

Leather Aniline Smoke Odor Remover - Kit-A3.so

$89.95
SKU:
Kit-A3.so
Weight:
0.600 KGS
Shipping:
Calculated at checkout
Quantity:
Share

Product Description

Leather Aniline Smoke Odor Remover - Kit-A3.so by Leather Doctor is designed to eliminate soot and smoke odors. d’Smoke-4.7 is used in conjunction with Prep-4.4 to effectively remove the sticky micron size smoke particles that lodges in the leather pores and stitching seams. It is the scrutinizing and removing of these off gassing sticky particles that will eventually solve the odor problem. The sticky residue is removed with Cleaner-3.8 follows with Rinse-3.0. Hydrator-3.3 helps relax the leather structure, reduce surface tension for fat and oil replenishing. Fatliquor LS-5.5 diffuses a classic leather scent besides penetrating and lubricating the leather structure for softness, suppleness and strength when dry. Protector-B+ enhances a non-stick rub-resistant protection with a buttery-feel that shield against sticky soiling with a classic leather scent. Note that the mentioned products suffix numbers denotes its pH value in this holistic approach in decontaminating body odors from aniline leathers

Instruction

Deodorizing with Restorative Cleaning
1. Apply Prep-4.4, agitate with horsehair Brush-1 and towel extract until it shows clean.
2. Re-apply Prep-4.4 and spray over with d’Smoke-4.7 for a combine agitation with horsehair Brush-1 and towel extract until it shows clean.
3. Clean and rinse sticky residue with Cleaner-3.8 follows with Rinse-3.0 and towel extracted until it shows clean.

Hydrating
1. Spray Hydrator-3.3 saturating to plumps the leather for an even appearance.

Fat and Oil Replenishing
1. Spray Fatliquor LS-5.5 redistributing with a foam brush until the leather is saturated.
2. Spray again when surface dries until repeat saturation.
3. Leave the leather to natural drying for extra softness.

Rub-Resistant Protection
1. Mist sprays Protector-B+, redistribute with a paper towel and ready for use when dry.

Kit Content and Product Description:

Leather Doctor® Prep-4.4 (60m)
This is the leather-safe milder version of Prep-7.7 with a pH value of 4.4. Its high viscosity is designed to be painted on neatly with a foam brush onto the leather. It works by allowing sufficient dwell-time to penetrate, lubricate and suspense soiling prior to towel extraction.

Leather Doctor® Cleaner-3.8 (250ml)
This is a leather-safe pH 3.8 cleaner for removing Prep-4.4 sticky residue.

Leather Doctor® Rinse-3.0 (250ml)
This is a leather-safe pH 3.0 rinse to neutralize alkalinity and remove all traces of cleaning residue to a healthy squeaky-feel.

Leather Doctor® d’Smoke-4.7 (250ml)
This is a waterbased pH 4.7 leather-safe soot and smoke cleaning booster and deodorizer. It is for effective removal of its sticky contamination as well as its overpowering odor when work in conjunction with Prep-4.4.

Leather Doctor® Hydrator-3.3 (250ml)
This is a waterbased pH 3.3 leather-safe hydrator with active surfactantcy for lowering the interfacial tension. It is for hydrating dried, stiffed or shrunk leathers to separates the crushed, stick together fibrils and relaxes them. It is for charging the leather protein fibers below its iso-electric point positive for long lasting hydrogen bond with the ionic negative charged Fatliquor-5.0. It is for facilitating colloidal water movement within the leather structure during the wicking process to move soiling particulates to the surface.

Leather Doctor® Fatliquor LS-5.5 (250ml)
This is a pH 5.5 anionic charged micro emulsion fatliquor with infused leather-scent to rejuvenate leather with softness, suppleness and strength. It penetrates and lubricates the leather fibers so that after drying they will be capable of sliding over one another smoothly. It softens the leather with stretchability, compressibility and flexibility, while enhancing its rip tensile strength greatly. It relaxes coarse breaks, creases and wrinkles enhance suppleness and prevent cracking. It helps to keep leather at its optimum physical performance and prevent premature ageing.

Leather Doctor® Protector-B+ (120ml)
This is a leather scented, non-film forming, non-stick, rub-resistant protector that impart a natural buttery-feel. Its non-stick breathable barrier is essentially to shield the detrimental effects of sticky soiling. Its natural buttery-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion. It reduces friction squeaks that wear the finishes during used.

Leather Brush-1 (1pc)
This horsehair detailing brush is designed ergonomically to be an extension of our hand with a sturdy grooved grip. It is designed to produce effective result easily and efficiently. It is recommended for all smooth leather for a soft and scratch-free cleaning. Its length is 7 inches with a three-row bristle 1½ inches cleaning head.

3 inch Poly-Brush (1 pc)
This is a dense foam that resists tearing and shredding and carries more material. It has a solid wood handle that allows greater control for quality results. It is used for controlling and spreading fatliquor for a more even distribution.

Paper Towel Rags (5 pc)
This rag works like cloth, lint free, highly absorbent and washable. General application is for extracting suspended soiling or for spreading hydrator, fatliquor or protector. It is used for both dye and topcoat padding for smooth leathers.

Product Reviews

Find Similar Products by Category