Perforated Leather Auto Seat Ink and Dye Stain Remover - Kit-Ap7.di by Leather Doctor is an innovative concept of removing blue jeans dye and ink stains featuring a “reverse transfer” technique utilizing a paper towel over the dwelling LeatherPrep-7.7 > LeatherDyecleaner-7.9 system. It works by penetrating; lubricating and suspending the stains on dwell time and the paper towel reverse absorbs the stain instantaneously from the leather. LeatherPrep-7.7 sticky residue is removed with LeatherCleaner-3.8 and LeatherRinse-3.0. Further dye removal is performed with LeatherDyeCleaner-7.9. LeatherHydrator-3.3 relaxes stiff leathers prior to fat and oil replenishing especially the stitching needle rows. LeatherFatliquor-5.0 rejuvenates the leather structure with softness and suppleness when dry. MicroLeatherTop-54M is an option for renewing the finish from friction wear. LeatherProtector-B (scentless) and LeatherScentedProtector-B+ imparts non-stick rub-resistant protection with a buttery feel that shields against sticky soiling and reduces friction noises. Note that the mentioned product suffix number denotes its pH value in this holistic leather-safe dye and ink stain removal system. This kit comes with concentrates in the spray bottles, to save on shipping, thus will need to be mixed with distilled water prior to use.
Accumulated Soiling Removal:
General accumulated soiling is first removed with LeatherPrep-7.7. The longer the dwelling the easier to remove soiling.
1- LeatherPrep-7.7 is applied and brush with detailing horsehair Brush-1, follows with terry towel extraction until towel shows clean.
2- Remaining soiling including ink and dye stains are again further treated with a ‘reverse transfer’ technique allowing the LeatherPrep-7.7 to wick trough the highly absorbent Towel-5 without any airspace. That is to work out the Towel-5 with Brush-3 until it becomes translucent without any white dry blotches.
3- Inspect every 8 to 24hrs and up to 72hrs to see the effect of the ‘reverse-transfer’ of stains.
4- When 72hrs is up, remove the LeatherPrep-7.7 residue with LeatherCleaner-3.8 > LeatherRinse-3.0 system and repeat with LeatherDyeCleaner-7.9.
5- LeatherDyeCleaner-7.9 is repeated through the above 1 to 4 steps to inspect for result satisfaction.
Testing with LeatherPrep-7.7
1- Cut out a piece of paper towel from the kit not bigger than our thumb size and soak it with LeatherPrep-7.7.
2- Test it on the worst stained area and inspect every 24 hours with fresh application until the stain is gone.
3- Observe if there is sign of stain removal, if it does, the stain will eventually be removed with repeat application.
4- To secure the test patch from dislodging wrapped it over with see through cling wrap.
5- When 72hrs is up with unsatisfactory result, proceed with LeatherDyeCleaner-7.9 testing over the existing spot.
Testing with LeatherDyeCleaner-7.9
1- Repeat procedure same as above 1 to 4 with LeatherDyeCleaner-7.9.
Repeat testing successes to the actual application.
LeatherProtector-B or LeatherScentedProtectorB+ routine protection reduces unwanted soiling.
Kit Content and Product Description:
Leather Doctor LeatherPrep-7.7 (60ml)
This is a water based pH-7.7 high viscosity leather cleaner developed to remove dye and ink stains on all pigmented leathers. It works by dwell-time allowing its superior penetrating, lubricating and suspending power to do its work. Sticky residue is removed with LeatherCleaner-3.8, rinsed with LeatherRinse-3.0 and neutralized with LeatherAcidifier-2.0 to a squeaky feel.
Leather Doctor LeatherDyeCleaner-7.9 (60ml)
LeatherDyeCleaner-7.9 also is formulated to remove dyestuff. This is a pH 7.9 water-based high viscosity dyestuff remover that works by dwell-time allowing its superior penetrating, lubricating and suspending power to do its work thus reduce unnecessary physical rubbing that may do more damages.
Leather Doctor LeatherCleaner-3.8 (250ml)
This is a leather-safe pH 3.8 cleaner for removing LeatherPrep-7.7 sticky residue.
Leather Doctor LeatherRinse-3.0 (250ml)
This is a leather-safe pH 3.0 rinse to neutralize alkalinity and remove all traces of cleaning residue to a healthy squeaky-feel.
Leather Doctor LeatherAcidifier-2.0 (250ml)
This is a water-based pH 2.0 leather acidifier ten times stronger than LeatherRinse-3.0 developed to rinse and neutralize alkalinity. The effect of neutralizing is to reduce tackiness or sliminess from alkalinity and returning the leather to a healthy squeaky-feel. The objective is to return the leather to its pH neutral of 3 – 5 for the leather-structure chemistry integrity sake.
Leather Doctor LeatherHydrator-3.3 (250ml)
This is a water-based pH 3.3 leather-safe hydrator with active surfactant for lowering the inter-facial tension. It is for hydrating dried, stiffed or shrunk leathers to separates the crushed, stick together fibrils and relaxes them. It is for charging the leather protein fibers below its ISO-electric point positive for long lasting hydrogen bond with the ionic negative charged LeatherFatliquor-5.0. It is for facilitating colloidal water movement within the leather structure during the wicking process to move soiling particulates to the surface.
Leather Doctor LeatherFatliquor-5.0 (250ml)
This is a pH 5.0 anionic charged micro emulsion fatliquor to rejuvenate leather with softness, suppleness and strength.
It is for replenishing original fat and oil that diminishes thru sun-bleaching, ageing, heat and alkaline exposure or cleaning.
It penetrates and lubricates the leather fibers so that after drying they will be capable of sliding over one another smoothly.
It softens the leather with stretch-ability, compressibility and flexibility, while enhancing its rip tensile strength greatly. It relaxes coarse breaks, creases and wrinkles enhance suppleness and prevent cracking. It helps to keep leather at its optimum physical performance and prevent premature ageing.
Leather Doctor MicroLeatherTop-54M (120ml)
This is a matte finishes water-based soft polyurethane leather topcoat. It is light-fast and non-yellowing. It has excellent flow and leveling properties. It is re-coatable and forms a flexible film coat. It gives good performing results from friction wear.
Leather Doctor LeatherProtector-B (250ml)
This is a scentless (leather-scented version use Protector-B+), non-film forming, non-stick, rub-resistant protector that impart a natural buttery-feel. Its non-stick breathable barrier is essentially to shield the detrimental effects of sticky soiling. Its natural buttery-feel protection increases the leather resistance to wet and dry rubs, thus reduce stretch, scuff and abrasion. It reduces friction squeaks that wear the finishes when one slides in and out of auto seats.
This horsehair detailing brush is designed ergonomically to be an extension of our hand with a sturdy grooved grip. It is designed to produce effective result easily and efficiently. It is recommended for all smooth leather for a soft and scratch-free cleaning. Its length is 7 inches with a three-row bristle 1½ inches cleaning head.
Towel-5 (5 pcs)
This rag works like cloth, lint free, highly absorbent and washable. General application is for extracting suspended soiling or for spreading hydrator, fatliquor or protector. It is used for both dye and topcoat padding for smooth leathers.
FoamBrush-3 (2 pcs)
This is a dense foam that resists tearing and shredding and carries more material. It has a solid wood handle that allows greater control for quality results. It is used for controlling and spreading fatliquor for a more even distribution.
Sand-2000 wet and dry sandpaper (1 pc)
This sandpaper is selected specially for its ability to smooth rough finish. Sanding is aim at the finish for better anchorage during refinishing. It is for smooth finishes in between coating when necessary.